Rabbit BOX

Rabbit Box is a total precision equipment that has all the fundamental functions to achieve the best results in regular rallies.

It is a device recommended for asphalt rallies on open roads.

With the Rabbit Box, the co-pilot can adjust measurements in real time with a precision of centimeters! Adjustments are made easily with the buttons on the remote control without having to touch the screen.

Connections

The Rabbit Box supports two types of connections, but it all depends on the number of your Rabbit Box. The old Rabbit Box with a number less than 1000 can only be connected by bluetooth and the new Rabbit Box with a number greater than 1000 can only be connected by wi-fi.

Wi-Fi connection

1. Turn on the Rabbit Box.
2. Restart the copilot’s tablet.
3. Activate Wi-Fi and connect to the Rabbit Box network (Ex: RabbitBox1000).
4. Open the Rabbit Rally 2.0 app on the co-pilot’s tablet.
5. Open the Connections screen.
6. Click on Sensor 1, 2 or Average (S1 and S2).
7. Click “Yes” to confirm.
8. Enter your Rabbit Box number, which is written on the yellow label, and press ok to confirm.

Bluetooth connection (old devices)

1. Turn on the Rabbit Box.
2. Restart the copilot’s tablet.
3. Activate GPS (Location) and Bluetooth.
4. Open the Rabbit Rally 2.0 app on the co-pilot’s tablet.
5. Open the Connections screen.
6. Click on Sensor 1, 2 or Average (S1 and S2).
7. Click “Yes” to confirm.
8. Enter your Rabbit Box number, which is written on the yellow label, and press ok to confirm.

If you want to use another tablet/mobile as a pilot screen, follow the steps in this link.